Wood window frames are often painted over present layers of paint which happen to be for a long time around the framework. Windows can prevent from working correctly. At some stage you start over and have to remove all preceding layers, but paint is also rough to scrape off without aid. You take it off readily for repainting with a couple of hand tools and can dampen paint. Using stripper, it is possible to do eliminate paint from several window frames within a day.
Put on goggles and rubber gloves. Put a drop cloth round the foot of the window. Dunk a little brush in to an open can of stripper. Beginning on a single side on top, paint a liberal coating of stripper on the window-frame. Work your way across the framework until all regions that are open are covered. Wait 1-5 minutes.
Hold the end of a putty knife at a 30-degree angle from the framework where you began using the stripper. Utilizing a reasonable quantity of pressure, drive on the edge of the putty knife across the framework. The paint softens right into a gel as well as it will be slid underneath by the putty knife. When the knife is built on by the paint, allow it to drop off the knife onto the fabric. Scrape the paint off the whole framework. Allow the framework dry for half an hour.
Open the window. Brush stripper on any portions of the window which are exposed. Allow the paint gel and scrape off it. Wait half an hour. Sand the window with 100-grit sandpaper on a hand-block. The window is willing to re-paint.