The best way to Convert Faucet Handles to Wall Hooks

Garden hose faucet handles and steel flip knobs held on with screws or threaded bolts are easy to change into wall hooks. Faucet handles with domes or steel collars can be mounted on a wall or a wood hook foundation. Faucet handles with tops that are painted steel bar handles, antique knobs and clear-plastic knobs that are faceted can be up-cycled in to attractive hooks that are fanciful.

Draw the middle of the handle, or a dot at the top middle of the collar or do me if it can not already have a screw hole. Faucet handles can not require drilling and that are round have threaded holes.

Set the faucet in a vice grip using the dot. Put on safety glasses. Drill a hole through the very top of the faucet or the collar handle on the mark to create a screw hole.

Remove any steel burs from the hole using a jeweler’s file.

Insert a 3/4 inch diameter, 2 inch-long screw to the hole to test it fits.

Hold where you want to set it up as a wall hook, the faucet handle up to the wall. Insert a pencil to the screw hole and attract a mark. Drill a 3/4 inch hole on the mark.

Tap a wall anchor to the hole using a hammer until its open-end is even with all the wall area.

Hold the faucet handle up to the wall and insert the screw to the wall anchor. The screw is tightened by hand using a screwdriver to to install the faucet handle hook. In the event the faucet didn’t need drilling and had a hole on the bottom, screw a rod that is threaded half-way onto the wall anchor after which screw the faucet handle onto another half of the rod that is threaded.

The best way to Attach Flower Containers Without Drilling Holes

Outdoor planters brighten outside areas up with no digging or space needs of a conventional backyard. Planters attach with screws, meaning you have to drill to the framework for installation to railings and homes. Should you have vinyl siding in your house, lease your residence, or basically do not want to leave a hole, there are alternatives to to add flower containers without drilling. You can nevertheless enjoy hanging baskets, planter boxes or a kitchen herb window backyard utilizing components and progressive containers.

Vinyl Siding Hangers

Install two D-rings spaced to the backside of the planter utilizing bolts or the screws which have the hooks. Insert the screws or bolts through them-so you do not have to drill holes in the event the planter currently has pilot holes. These D-rings in order to hang it to the vinyl siding hooks adapt the planter. With respect to the planter box, there may currently be hanging hooks on the back or little slots that will fit over hooks that are trim.

Measure the the length between each D-ring slot or on the planter so that you know how far the vinyl siding hooks. Push up the little hook conclusion of every vinyl siding hanger spaced to the distance. It is possible to easily split up the two panels together with your hand to create room.

Pull the hangers toward you, then pull-down somewhat before you hear a little click that signifies the hook is locked in. This is a really delicate movement that guarantees that the conclusion of the hook grabs onto the vinyl siding panel; some hooks might lock themselves in location without the need for this. Pull on the hooks to simulate the pounds of a planter to generate sure they may be locked in spot.

Adjust the spacing of the vinyl siding hooks if required s O they have been spaced the sam e length aside as the drings in the planter. The hooks effortlessly slide straight back and forth.

Slip the drings over the hook ends that are big. Release the hanger watchfully to guarantee a correct hold. Line up the planter together with the hooks in the event the planter h AS slots on the again and slide each hook.

Slip the loop or hook end of a hanging basket planter within the vinyl siding hook. Unlike window-box planters, hanging basket planters need one vinyl siding hook per planter.

Deck Rail Planters

Install brackets, created to to suit the width of your deck or porch railing, on the rear of the planter utilizing the components that is supplied. Two mounting brackets are typically needed by planter containers, with regards to the dimensions of the box. Line up the holes in the planter as well as the bracket, drive the bolt and tighten a nut within the bolt having a wrench.

Adjust the width of the mounting brackets to to suit the width of the rail, if relevant. Loosen the bolton the most notable of the bracket, slide the bracket then tighten the bolt to lock the the positioning.

Fit the hooks of the mounting brackets within the deck rail and re-lease the planter to ensure the hooks seize the fringe of of the rail. Some brackets have an additional bend on the conclusion of the hooks that suit beneath the lip of the rail, s O the pounds of the planter locks them in spot while hooks merely suit within the rail.