The best way to Remove Ceiling Medallions

Ceiling medallions include definition as well as design to your room. They are able to cover a opening in the ceiling which may otherwise be observed behind the canopy of a fixture. They are able to also protect a paint-job that is shoddy. While a medallion can do every one of these points, if you aren’t keen on its own appearance, or you you want to to alter the design as well as decor of your area, you might find it essential to eliminate the medallion in the ceiling. It can be removed by you in parts or in one piece, depending in your plans for the medallion that is unique.

Turn off the circuit-breaker to the light fixture installed in the middle of the ceiling medallion. Attempt to to show the fixture on in the light change to make sure you switched off off the breaker that was right.

Hold a non-contact electricity sensor on the fixture alongside the sockets. The electricity sensor sound an alarm in the event the electricity continues to be connected to the fixture and will light.

Remove the two screws in the fixture canopy keeping the fixture from the medallion. Some canopies are held having a locknut threaded on a hickey against the medallion. A loop on the conclusion of the hickey connects to your chain in the fixture.

Lower the light fixture canopy to expose the mild fixture’s electrical wiring. Place the sensor alongside the wires on the other side of the canopy to assure the electricity is disconnected.

The wire connectors keeping together the three sets of wires . Lower the fixture and set it apart.

Cut through the bead of caulk used using a utility knife across the exterior edge of the medallion. Examine the face of the medallion for just about any screws driven via the medallion and to the ceiling joists. Remove any screws you see in the surface of the medallion.

Slide a-2-inch-broad adaptable metal putty knife involving the ceiling as well as the medallion. Slowly work the edges of the medallion around, functioning it unfastened in the ceiling. Use a cake icing spatula to get involving larger-diameter medallions and the ceiling.

If you don’t intend to take it off without trouble cut through the medallion using a dry wall noticed. Each piece can be loosened by you together with the 2inch-extensive putty knife, enabling you a bit mo Re wiggle-room when eliminating the medallion.

Aerosol spray ceiling texture in the region where the medallion was eliminated by you. Several kinds of ceiling textures are obtainable. Choose the one that most readily useful matches your ceiling texture that is existing and follow the instructions supplied by the maker. Paint the texture to mix with all the the remaining of the ceiling.

Reinstall your fixture that is mild and change the breaker straight back on.