Before the introduction of vinyl siding, several houses were coated with cedar or redwood lap siding. Today, the siding is employed by builders and homeowners who want to preserve the architectural look of normal wood. The advantages of cedar and redwood are their qualities that resist the effects of sunlight and dampness. However, these attributes trigger the the top of wood. It’s possible for you to brighten the look of lap siding using a sanding method that unveils the wood that is the new below the area.
Stage scaffold in the the outside wall of the building or step ladders. Close and latch any windows and eliminate the screens.
Start in the very best of the wall by rinsing the siding with water from a hose Eliminate any buildup of grime in the siding using a scouring pad and remove surface dust. Allow the siding to dry totally.
Put on a dust mask as well as safety glasses. Set up an orbital sander with 80-grit sandpaper. Work from one end of the lap siding in a horizontal path of the wall as you sand the encounter and the top.
Attach 80-grit sandpaper therefore it extends past the edges of the pad 1/2 inch. Fold the edges of the paper and contour them. Use the edges to sand underneath of the laps — edges that are thick — on each bit of siding.
Start in the very best of the wall and brush the dust from your siding using a workshop brush to prep the siding for sealer.